Met dit Home Assistant-pakket draait je vaatwasser op het goedkoopste moment vóór je deadline, ook als hij geen start op afstand heeft. Je kiest het programma en drukt op start, net als altijd. Na 15 seconden zet een slimme stekker de vaatwasser uit. Op de starttijd die DAO (Day Ahead Optimizer) berekent, gaat de stekker weer aan en gaat de vaatwasser verder met het gekozen programma.

In Home Assistant kies je hetzelfde programma, zodat DAO weet hoe lang het duurt en hoeveel stroom het gebruikt, en een deadline: Standaard, Binnen x uur of Klaar om.

Wat het pakket doet:

  • Een status per vaatwasbeurt: Afgerond, Aangezet, Gepauzeerd, Gestart
  • Pauzeren met de stekker 15 seconden na het starten
  • Een DAO-venster van nu tot je deadline, zodra je een programma kiest
  • Stekker weer aan op de berekende starttijd, of direct met direct start
  • Een melding als je vergeten bent het programma in Home Assistant te kiezen
  • Een vangnet: de stekker gaat vanzelf weer aan als hij onbedoeld uit staat

Onderaan dit artikel kun je de complete, kant-en-klare YAML downloaden, met een uitgebreide PDF-handleiding. Getest met Home Assistant 2026.10.

Het pakket bestaat uit: een package met helpers en 6 automatiseringen, en een gedeeld bestand om de DAO-berekening te starten.

⚙️ Wat heb je nodig?

Hardware:

  • Een vaatwasser die na een stroomonderbreking verdergaat waar hij was (test dit eerst: zet hem tijdens een programma even zonder stroom)
  • Een slimme stekker met energiemeting die 16 A (3680 W) aankan, bijvoorbeeld een Zigbee- of Shelly-stekker
  • DAO (Day Ahead Optimizer) en een dynamisch energiecontract

In Home Assistant:

  • DAO als add-on of Docker-container, gekoppeld aan Home Assistant
  • De Home Assistant Companion-app voor de meldingen
  • Ondersteuning voor packages in configuration.yaml

Zelf aan te maken helpers:

  • input_select.dao_vaatwasser_status — Afgerond, Aangezet, Gepauzeerd of Gestart
  • input_select.dao_vaatwasser_programma — het gekozen programma (0 Uit = niets gepland)
  • input_select.vaatwasser_klaar_modus — Standaard, Binnen x uur of Klaar om
  • input_number.vaatwasser_klaar_binnen / input_datetime.vaatwasser_klaar_om — de deadline
  • input_datetime.dao_vaatwasser_start_window / end_window / calculated_start / calculated_end — venster en planning van DAO
  • input_boolean.dao_vaatwasser_direct_start — direct starten, los van DAO

🧩 De 5 onderdelen

Automatisering: Pauzeren na start

Wat doet dit: zet de vaatwasser 15 seconden na het starten uit met de stekker.

Hoe maak je dit:

- delay:
    seconds: 15
- action: switch.turn_off
  target:
    entity_id: switch.vaatwasser_stekker

Trekt de vaatwasser 10 seconden meer dan 5 W terwijl de status Afgerond is, dan gaat de status naar Aangezet. 15 seconden later gaat de stekker uit en wordt de status Gepauzeerd. Heb je nog geen programma gekozen in Home Assistant, dan krijg je een melding.

Automatisering: DAO-venster berekenen

Wat doet dit: zet bij een programmakeuze of een nieuwe deadline het venster voor DAO en start een berekening.

Hoe maak je dit:

variables:
  duur: "{{ {'1 Eco': 180}.get(states('input_select.dao_vaatwasser_programma'), 0) }}"

Na 10 seconden wordt het venster gezet van nu tot de deadline, nooit eerder dan het eerstvolgende kwartier plus de programmaduur. De oude planning wordt gewist en DAO rekent direct.

Automatisering: Starten op DAO-tijd

Wat doet dit: zet de stekker weer aan op de berekende starttijd.

Hoe maak je dit:

- action: switch.turn_on
  target:
    entity_id: switch.vaatwasser_stekker

Elke minuut kijkt de automatisering of de status Gepauzeerd is en of de starttijd van DAO net bereikt is (niet langer dan 30 minuten geleden). Dan gaat de stekker aan, wordt de status Gestart en krijg je een melding met de verwachte eindtijd.

Automatisering: Klaar detecteren

Wat doet dit: ziet aan het vermogen dat de vaatwasser klaar is.

Hoe maak je dit:

triggers:
  - trigger: numeric_state
    entity_id: sensor.vaatwasser_vermogen
    below: 5
    for:
      minutes: 5

Onder 5 W gedurende 5 minuten terwijl de status Gestart is: klaar. De status wordt Afgerond, het programma gaat terug naar 0 Uit en je krijgt een klaarmelding. De 5 minuten vangen de droogfase op, waarin een vaatwasser vaak weinig stroom gebruikt.

Automatisering: Vangnet voor de stekker

Wat doet dit: zet de stekker weer aan als hij uit staat terwijl de vaatwasser niet gepauzeerd is.

Hoe maak je dit:

conditions:
  - condition: not
    conditions:
      - condition: state
        entity_id: input_select.dao_vaatwasser_status
        state: Gepauzeerd

Zo kun je altijd met de hand een programma starten, ook na een herstart van Home Assistant of als iemand de stekker uitzette.

📝 Gebruikte templates

  • Einde van het venster — de deadline, maar nooit eerder dan het eerstvolgende kwartier plus de programmaduur.
  • Starttijd geldig — nu is ná de berekende start, maar niet meer dan 30 minuten, en de automatisering is voor deze planning nog niet gelopen.

❓ Veelgestelde vragen

Werkt dit met elke vaatwasser? Met vaatwassers die na een stroomonderbreking verdergaan waar ze waren. Test dat eerst: start een programma, haal na een minuut de stekker eruit en steek hem er na een paar minuten weer in.

Is het slecht voor de vaatwasser om hem zonder stroom te zetten? De vaatwasser wordt alleen in de eerste seconden van het programma gepauzeerd, meestal nog vóór het water verwarmd wordt. Dat is vergelijkbaar met een korte stroomstoring.

Heb ik DAO nodig? Ja, DAO bepaalt de starttijd en houdt rekening met je zonnepanelen, thuisbatterij en andere apparaten.

Mijn vaatwasser heeft start op afstand. Kan dat ook? Ja. Gebruik dan de opzet van ons pakket voor de wasmachine of droger, met een start-knop in plaats van de stekker.

Gebruik je DAO nog niet? Lees eerst Day Ahead Optimizer (DAO) met Home Assistant. Ook de wasmachine en droger laten plannen door DAO?


Hieronder kun je bovenstaande automatiseringen downloaden incl. de genoemde helpers en templates, de volledige YAML en een uitgebreide PDF-handleiding.

De genoemde helpers kun je zelf aanmaken in Home Assistant onder apparaten en diensten -> helpers -> Helper toevoegen.

Let op gebruik is op eigen risico!!


Home Assistant: start your dishwasher at the cheapest time with DAO and a smart plug

With this Home Assistant package your dishwasher runs at the cheapest moment before your deadline, even if it has no remote start. You choose the program and press start, as always. After 15 seconds a smart plug switches the dishwasher off. At the start time calculated by DAO (Day Ahead Optimizer), the plug switches on again and the dishwasher continues with the chosen program.

In Home Assistant you choose the same program, so DAO knows how long it takes and how much power it uses, and a deadline: Standaard, Binnen x uur (within x hours) or Klaar om (ready at).

What the package does:

  • A status per wash: Afgerond, Aangezet, Gepauzeerd, Gestart
  • Pausing with the plug 15 seconds after starting
  • A DAO window from now to your deadline as soon as you choose a program
  • Plug back on at the calculated start time, or immediately with direct start
  • A notification if you forgot to choose the program in Home Assistant
  • A safety net: the plug switches back on if it is off unintentionally

At the bottom of this article you can download the complete, ready-to-use YAML with an extensive PDF guide. Tested with Home Assistant 2026.10.

The package consists of: a package with helpers and 6 automations, and a shared file to start the DAO calculation.

⚙️ What do you need?

Hardware:

  • A dishwasher that resumes after a power cut where it left off (test this first: cut its power briefly during a program)
  • A smart plug with energy metering rated for 16 A (3680 W), for example a Zigbee or Shelly plug
  • DAO (Day Ahead Optimizer) and a dynamic energy contract

In Home Assistant:

  • DAO as an add-on or Docker container, connected to Home Assistant
  • The Home Assistant Companion app for notifications
  • Support for packages in configuration.yaml

Helpers to create yourself:

  • input_select.dao_vaatwasser_status — Afgerond, Aangezet, Gepauzeerd or Gestart
  • input_select.dao_vaatwasser_programma — the chosen program (0 Uit = nothing planned)
  • input_select.vaatwasser_klaar_modus — Standaard, Binnen x uur or Klaar om
  • input_number.vaatwasser_klaar_binnen / input_datetime.vaatwasser_klaar_om — the deadline
  • input_datetime.dao_vaatwasser_start_window / end_window / calculated_start / calculated_end — DAO window and schedule
  • input_boolean.dao_vaatwasser_direct_start — start right away, regardless of DAO

🧩 The 5 parts

Automation: Pause after start

What it does: switches the dishwasher off with the plug 15 seconds after starting.

How to build it:

- delay:
    seconds: 15
- action: switch.turn_off
  target:
    entity_id: switch.vaatwasser_stekker

If the dishwasher draws more than 5 W for 10 seconds while the status is Afgerond, the status becomes Aangezet. 15 seconds later the plug switches off and the status becomes Gepauzeerd. If you haven’t chosen a program in Home Assistant yet, you get a notification.

Automation: Calculate DAO window

What it does: sets the DAO window and starts a calculation when you choose a program or change the deadline.

How to build it:

variables:
  duur: "{{ {'1 Eco': 180}.get(states('input_select.dao_vaatwasser_programma'), 0) }}"

After 10 seconds the window is set from now to the deadline, never earlier than the next quarter hour plus the program duration. The old schedule is cleared and DAO calculates right away.

Automation: Start at DAO time

What it does: switches the plug back on at the calculated start time.

How to build it:

- action: switch.turn_on
  target:
    entity_id: switch.vaatwasser_stekker

Every minute the automation checks whether the status is Gepauzeerd and DAO’s start time has just been reached (no more than 30 minutes ago). Then the plug switches on, the status becomes Gestart and you get a notification with the expected end time.

Automation: Detect finish

What it does: sees from the power that the dishwasher is done.

How to build it:

triggers:
  - trigger: numeric_state
    entity_id: sensor.vaatwasser_vermogen
    below: 5
    for:
      minutes: 5

Below 5 W for 5 minutes while the status is Gestart: done. The status becomes Afgerond, the program returns to 0 Uit and you get a done notification. The 5 minutes cover the drying phase, in which a dishwasher often uses little power.

Automation: Safety net for the plug

What it does: switches the plug back on if it is off while the dishwasher isn’t paused.

How to build it:

conditions:
  - condition: not
    conditions:
      - condition: state
        entity_id: input_select.dao_vaatwasser_status
        state: Gepauzeerd

This way you can always start a program by hand, also after a Home Assistant restart or if someone switched the plug off.

📝 Templates used

  • End of the window — the deadline, but never earlier than the next quarter hour plus the program duration.
  • Start time valid — now is after the calculated start, but no more than 30 minutes, and the automation hasn’t run for this schedule yet.

❓ Frequently asked questions

Does this work with any dishwasher? With dishwashers that resume after a power cut where they left off. Test this first: start a program, unplug it after a minute and plug it back in after a few minutes.

Is it bad for the dishwasher to cut its power? The dishwasher is only paused in the first seconds of the program, usually before the water is heated. That is comparable to a short power cut.

Do I need DAO? Yes, DAO determines the start time and takes your solar panels, home battery and other appliances into account.

My dishwasher has remote start. Can I use that? Yes. Then use the setup of our washing machine or dryer package, with a start button instead of the plug.

Not using DAO yet? First read Day Ahead Optimizer (DAO) with Home Assistant. Let DAO plan the washing machine and dryer too?


Below you can download the automations above including the helpers and templates mentioned, the complete YAML and an extensive PDF guide.

You can create the helpers yourself in Home Assistant under Devices & services -> Helpers -> Create helper.

Use at your own risk!!



Geef een reactie

Je e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *